U.S. Foam 6% AFFF is a synthetic film forming foam concentrate designed for use on non-polar, hydrocarbon hazards. When proportioned with water and applied with conventional foam or water/fog equipment. U.S. Foam 6% AFFF provides excellent control and extinguishment of Class B fires by spreading a vapor-seallig film over the liquid fuel. This vapor seal inhibits reflash even when the foam blanket is ruptured and also allows the product to be used to secure non-ignited spills. U.S. Foam 6% AFFF provides excellent penetrating and wetting qualities when used on Class A fires. This is important when extinguishing deep-seated fires in wood, paper, rubber tires and ordinary combustibles.
U.S. Foam 6% AFFF can be used with conventional foam equipment with fresh, sea or brackish water. Self-educting foam nozzles and foam nozzles with in-line eductors are among the most common types of hardware for application.
In addition to its use in aspirating foam equipment, U.S. Foam 6% AFFF can be dispensed effectively through non-aspirating equipment including fog nozzles, water spray devices and standard sprinklers.
U.S. Foam 6% AFFF is effective sub surface injection systems for non-water soluble hydrocarbons. Sub surface injection is sate and reliable for fixed protection of storage tanks.
U.S. Foam 6% AFFF may be applied to fires simultaneously with dry chemical fire fighting agents because the two are compatible.
TYPICAL PROPERTIES
Effective: Rapid extinguishment reduces the chances of dangerous incidents and reduces the risk to property and equipment. U.S. Foam 6% AFFF also prevents reflash and burn back, which are major causes of injuries. The securing action of U.S. Foam 6% AFFF minimizes the fire hazard during cleanup of flammable liquid spills.
Reliable: U.S. Foam 6% AFFF can be stored for virtually an indefinite period of time in approved equipment and systems. NFPA I I recommends annual inspection of all foam systems.
Economical: U.S. Foam 6% AFFF offers faster extinguishment than protein based foams, so less agent is required in training and actual fire emergencies. Its wide range of applications reduces or eliminates the need to inventory other special type agents.
U.S. Foam 6% AFFF concentrates undergo a program of ongoing testing to assess the impact of U S. Foam products on the natural environment U S. Foam products are low in toxicity to tested aquatic organisms. (Toxicity information Is available from Product Environmental Data sheets. Matenal Safetv Data sheets and Toxicity Summary sheets for individual products. ) Aquatic life is not adversely affected when U.S. Foam products are used and disposed of properly. U.S Foam products can be successfully treated in biological waste water treatment systems. ( Request Product Environmental Data sheets and Disposal Recommendations from your U.S. Foam representative).
U.S. Foam 6% AFFF may be stored in its shipping container without change in its original physical or chemical characteristics. It does not show significant sedimentation or precipitation in storage or after temperature cycling. Freezing and thawing have no effect on performance and the concentrate proportions satisfactorily in ordinary equipment at temperatures above 32°F.
Freeze- thaw cycling may cause slight stratification which may be overcome with moderate agitation. Annual inspections as prescribed in NFPA11 is recommended.
All U.S. Foam products are available in 5 gallon pails, 55 gallon drums or 275 gallon Totes.